Wireless Multi-channel Data Logger Captures Up to 105 Data Points via Bluetooth®
DESCRIPTION
Hioki Memory HiLoggers are high-speed data loggers for recording multiple channels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The LR8410-20 is an innovative wireless logging system capable of capturing up to 105 channels of data wirelessly using Bluetooth® wireless technology.
Key Features
• Capture logging data using Bluetooth® wireless technology. Install logging modules in hard-to-reach locations (over line-of-sight distances of up to 30 meters *1 )
(*1) The presence of obstructions may shorten this range
• Choose an input unit based on the parameters you wish to measure (15-channel and 2-channel units are available)
• Easily add up to 7 input units wirelessly to keep your environment free of tangled wires (for a total of up to 105 channels when using 15-channel units)
• 100 msec simultaneous sampling across all channels using rapid scanning method
• Quick Set guide makes configuration a breeze
MODEL NO. (ORDER CODE)
| LR8410-20 | English model, main unit only |
|---|
The LR8410-20 alone is not capable of making measurements. One or more input modules are necessary to measure. The main unit and input modules are not bundled with the Battery Pack Z1007. Thermocouples are not provided by HIOKI, and must be purchased from a separate vendor.
Note: Use only HIOKI SD Memory card, which is manufactured to strict industrial standards, for long-term storage of important data. Correct operation of non-HIOKI SD cards or USB memory sticks are not guaranteed. *Models LR8512 to LR8515 may only be used in countries in which they have been certified.
These products emit radio waves. Use of radio waves is subject to licensing requirements in certain countries. Use in countries or regions other than those listed above may constitute a violation of law, exposing the operator to legal penalties.
*The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HIOKI E.E. CORPORATION is under license. *For the latest information about countries and regions where wireless operation is currently supported, please visit the Hioki website.
PRODUCT VIDEO
A WIRELESS DATA LOGGER THAT SUPPORTS A VARIETY OF MEASUREMENTS WITH A DIVERSE LINE OF MEASUREMENT UNITS
For applications such as ● Developing and evaluating parts ● Simulating electricity generation characteristics and evaluating performance of solar power systems ● Evaluating air conditioning equipment and systems and measuring temperature ● Performance evaluation of the house ● Verifying elevator operation and performing maintenance ● Developing inverters and motors for railcars ● Monitoring the growth environment in a plastic greenhouse or other structure ● Managing temperature and humidity while shipping freight ● Recording rainfall volume, etc
A WIRELESS DATA LOGGER THAN CAN MEASURE UP TO 105 CHANNELS OF DATA
Connect up to 7 measurement units to perform multipoint measurement across a maximum of 105 channels when using 15-channel units LR8510 or LR8511. Also pair with 1- or 2-channel wireless loggers, including LR8520, LR8512, LR8513, LR8514 or LR8515. Mix and match 7 types of measurement units to consolidate the measurements you need. Use Bluetooth(R) wireless technology to send and receive data over line-of-sight distances of up to 30 m. ＊The presence of obstructions may shorten this range
MAKING THE WIRING PROCESS FASTER WHILE MINIMIZING COSTS – WIRELESS DATA LOGGER
With a wired instrument… Recording a large number of channels means you’ll have to deal with a mess of wires. In addition to increasing the cost of connection cables and thermocouples, long wires make setup more time-consuming. << Resolved with wireless data transmission >> The lack of wiring around the instrument makes for a clean installation. Minimal wiring means lower costs and faster setup.
MAKE MEASUREMENTS WHERE IT WOULD NOT BE PRACTICAL TO WIRE EQUIPMENT DIRECTLY – WIRELESS DATA LOGGER
With a wired instrument… Running a large number of thermocouples from a logger to the ceiling or crawlspace would mean a wiring nightmare. << Resolved with wireless data transmission >> There’s no need to connect measurement units to the Wireless Logging Station LR8410 with long wires. Instead, you can install the logging module in an attic or crawl space and check data from the LR8410’s screen while measurement is ongoing.
MAKE MEASUREMENTS OF INTERIOR CONDITIONS FROM THE OUTSIDE, WITH THE DOOR CLOSED – WIRELESS DATA LOGGER
With a wired instrument… We can’t close the windows or doors due to all the wires. As a result, there’s a gap in the gasket, and the vehicle cannot be sealed. << Resolved with wireless data transmission >> Only the measurement unit needs to be installed in the vehicle. Wires do not protrude outside the vehicle, allowing the windows and doors to be closed so that the vehicle can be tested under airtight conditions.
TEST DATA FROM MULTIPLE LOCATIONS CAN BE MANAGED ALONG A SINGLE TIME AXIS. – WIRELESS DATA LOGGER
Installing individual loggers on test equipment means each set of measured data is on its on time line, making it hard to compare the data with respect to a single time axis. Model LR8410 can observe measurement results from multiple pieces of experimental equipment as part of the same time series. Logging modules are small enough to fit almost anywhere.
ENSURE PEACE OF MIND EVEN IN THE EVENT OF A SIGNAL DISRUPTION – BACKUP FUNCTION
Measurement units and wireless loggers have built-in buffer memory so that measurement data can be saved if communication is temporarily disrupted. This data is resent once communication is restored, allowing the measurement data to be stored in the Wireless Logging Station.
EASY WIRELESS SETUP
The LR8410 features Hioki’s Quick Set function. Since measurement units can be registered simply by following the Unit Registration Guide, even first-time users can start measurement right away. If no logging modules have been registered, the Quick Set screen is displayed when the LR8410 is turned on, and the instrument automatically detects any logging modules that are within communications range. It’s also easy to configure settings when adding measurement units later.
GET RESULTS FROM THE JOB SITE IN REAL-TIME, GENNECT CROSS SF4000
Capture data on the PC while testing remotely
BASIC SPECIFICATIONS (ACCURACY GUARANTEED FOR 1 YEAR, POST-ADJUSTMENT ACCURACY GUARANTEED FOR 1 YEAR)
| No. of measurement channels | Max. 105 ch (use 7 units of LR8510 or LR8511) One or more LR8510 or LR8511 measurement modules are required. Main unit can control up to 7 modules with Bluetooth® wireless technology, mix and match modules as needed |
|---|---|
| Pulse, digital input | [Pulse totalization] [Rotation count] Not available |
| Recording intervals | 100 ms(*2), 200 ms to 1 hour, 16 selections (All input channels are scanned within each recording interval.) (*2) Setting not available when the thermocouple burnout detection setting is on |
| Data storage | Internal memory: 8 M-words, Data storage media: SD memory card or USB memory stick (Only data recorded to a genuine HIOKI SD memory card is guaranteed) |
| Interface | LAN: 100BASE-TX, Functions: Data acquisition using bundled software or PC commands, FTP server, FTP client, HTTP server function, or E-mail system USB: USB 2.0 series mini-B receptacle ×1, Functions: Data acquisition using bundled software or PC commands, Transfer data from the SD memory card to a PC via USB drive mode |
| Display device | 5.7 inch TFT color liquid crystal display (640 × 480 pixel) |
| Functions | Save waveform data in real time to the SD memory card or USB memory stick, Numerical value calculations, Waveform calculations, 4ch alarm output (not isolated, common ground), and others |
| Power supply | [AC adapter] Using the AC adapter Z1008 (100 to 240 V AC, 50/60 Hz), 45 VA Max. (including AC adapter), 15 VA Max. (exclusive of AC adapter) [Internal battery] Using the Battery pack Z1007 (optional accessory), 3 hours of continuous use (at 23 ˚C reference data), 7 VA Max. [External power] 10 to 28 V DC, 15 VA Max. (Please contact your HIOKI distributor for connection cord) |
| Dimensions and mass | 230 mm (9.06 in) W × 125 mm (4.92 in) H × 36 mm (1.42 in) D, 700 g (24.7 oz) (excluding Battery pack) |
| Accessories | Instruction manual × 1, Measurement guide × 1, SD memory card (2GB) Z4001 × 1, CD-R (data collection software “Logger Utility”) × 1, USB cable × 1, AC Adapter Z1008 × 1 |
COMBINATION STATUS WITH LABVIEW OR MATLAB SCRIPT
| Compatible models | LabVIEW | MATLAB script |
|---|---|---|
| LR8410-20 | OK | N/A |
COUNTRIES AND REGIONS WHERE WIRELESS OPERATION IS CURRENTLY SUPPORTED (LR8410-20, -30)LAST UPDATE: JUNE 26, 2019
| Wireless certification | Japan, United States, Canada, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom, Thailand, and Chile |
|---|---|
| Wireless certification (special) | Singapore (Order Code: LR8410-20 only) China (Order Code: LR8410-30 only) Taiwan (Order Code: LR8410-20, LR8410-30 only) Indonesia (Order Code: LR8410-20 only) Australia, New Zealand (Order Code: LR8410-20 only) UAE (Order Code: LR8410-20 only) India (Order Code: LR8410-20 only) |
| Exempt from the wireless regulations | Viet Nam, Hong Kong, Macao, Myanmar, Russian Federation, Colombia, Pakistan, Georgia, and Kenya |
CATALOGS
WIRELESS LOGGING STATION LR8410 
WIRELESS MINI LOGGER LR8512, LR8513, LR8514, LR8515, LR8520
FLYER CATALOG: LR8410 LINK
MEASURING INSTRUMENTS FOR THE BATTERY INDUSTRY
GENNECT ONE SF4000
DECLARATION OF CONFORMITY
WIRELESS LOGGING STATION LR8410-20,LR8410-30 [109KB]
MANUALS
CATALOG: GENNECT CROSS SF4000
WIRELESS LOGGING STATION LR8410 [149KB]
DRIVERS, FIRMWARE
WIRELESS LOGGING STATION LR8410 MEMORY HILOGGER LR8400 LR8401 LR8402 8423 LABVIEW 2011 DRIVER AND COMMUNICATION COMMAND MANUAL 
LOGGER UTILITY/WIRELESS LOGGER COLLECTOR FOR MODELS 8423 8430 LR8400SERIES LR8410 LR8431 LR8432 LR851XSERIES LR8520
OPTIONS
Carrying cases and stands
FIXED STAND Z1009
For wall hanging and slanted bench mounting
CARRYING CASE C1007
Holds one LR8410 and four measurement units
High voltage measurement
* Maximum input-to-ground rated voltages fall within these products’ specifications ranges (and do not affect the connected input units)
AC ADAPTER Z1008
100 to 240V AC
DIFFERENTIAL PROBE P9000
• Waveform only for exclusive use with Memory HiCorders (P9000-01) or waveform/RMS value switchable (P9000-02) • For use with input of up to 1 kV AC/DC • Requires separate power supply
Input options
Thermocouple *For reference only. Please purchase locally.
HUMIDITY SENSOR Z2000
3 m (9.84 ft) length
Interface Cables
LAN CABLE 9642
Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length
Options for Differential Probes
Can also be used with accessories such as L4936/L4937/L4931 as available for other testers.
GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
CONVERSION CABLE L1011-10
2.4 m (7.87 ft) length, covert BNC to wire
CONVERSION CABLE L1011
30 cm (0.98 ft) length, covert BNC to wire
PC peripherals
GENNECT CROSS SF4000
• Software automatically recognizes LAN-connected measuring instrument • Display acquired data as graphs in real-time • Windows compatible
Plug-in input modules
*Input cords are not included. Please purchase them separately. *When using 9709 with Current Unit 8971, a total of 7 current probes can be used.
WIRELESS UNIVERSAL UNIT LR8511
• 4 terminals push-button type • 15 channels • Voltage, Temperature with thermocouple • Platinum Resistance temperature sensor • Humidity, or Resistance measurement • for the LR8410
WIRELESS FUNGAL LOGGER LR8520
• Predict how easy it is for fungi to grow • Applications in food and grain storage and building maintenance • Upload data wirelessly to smartphone or tablet
WIRELESS VOLTAGE/TEMP LOGGER LR8515
• 2 ch Voltage (±50 mV to ±50 V)/ Thermocouple recording • Minimum 0.1 sec interval • Wireless data download to a tablet or computer
WIRELESS HUMIDITY LOGGER LR8514
• 2 ch Temperature/ 2 ch Humidity recording • – 40 °C to 80 °C/ 0% to 100 % RH (with optional sensor) • Minimum 0.5 sec interval • Wireless data download to a tablet or computer
WIRELESS CLAMP LOGGER LR8513
• For AC/DC load current • For AC leak current • 2ch • use with the LR8410s
WIRELESS PULSE LOGGER LR8512
• For pulse count • 2ch, pulse, rotation, 1/0 signal • 0.1 sec interval • For the LR8410s
WIRELESS VOLTAGE/TEMP UNIT LR8510
• 2 terminals M-3 mm screw type • 15 channels, Voltage, Temperature with thermocouple • for the LR8410
Power supply
*AC adapter is bundled with the LR8410-20, LR8510/8511, LR8450, LR8450-01
BATTERY PACK Z1007
Li-ion, Charges while installed
AC ADAPTER Z1008
100 to 240V AC
Storage media
Precaution on purchasing memory device
Use only the memory device sold by HIOKI. Compatibility and performance are not guaranteed for memory device made by other manufacturers. You may be unable to read from or save data to such devices.
SD MEMORY CARD Z4003
8 GB capacity
SD MEMORY CARD 2GB Z4001
2 GB capacity
Voltage Input
*The L1000 is bundled with PQ3198 *Please inquire about voltage cord extension
GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V