d. LCR HiTESTER 3511-50

d. LCR HiTESTER 3511-50

d. LCR HiTESTER 3511-50

Compact, dual-band 120Hz/1kHz LCR Meter for Integration into Automated Production Lines

DESCRIPTION

MODEL NO. (ORDER CODE)

3511-50

Note: This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.

CE
GPIB
RS232C

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3511-50 is a compact, general purpose LCR meter for on-board testing of capacitors and coils used in electrical equipment and devices such as automotive-related components.

KEY FEATURES

• High speed measurement: 5 ms (1 kHz) or 13 ms (120 Hz)
• Built-in high-speed comparator
• Measurement frequency: 1 kHz/120 Hz selectable
• From minute measurement with a maximum resolution of 0.01 pF to high-capacity measurement up to 1 F
• Print measured values and comparator results with the Printer 9442 (option)

BASIC SPECIFICATIONS (ACCURACY GUARANTEED FOR 6 MONTHS, POST-ADJUSTMENT ACCURACY GUARANTEED FOR 6 MONTHS)

Measurement parameters|Z|, θ, R, C, L, D (tanδ), Q
Measurement range|Z|, R: 10 mΩ to 200.00 MΩ θ: -90.00° to +90.00°
C (at 120 Hz): 9.40 pF to 999.99 mF, C (at 1 kHz): 0.940 pF to 99.999 mF
L (at 120 Hz): 14.00 µH to 200.00 kH, L (at 1 kHz): 1.600 µH to 20.000 kH
D: 0.0001 to 1.9900, Q: 0.85 to 999.99
Basic accuracy|Z| : ±0.08 % rdg. θ: ±0.05°
Measurement frequency120 Hz or 1 kHz
Measurement signal level50 mV, 500 mV, 1 V rms
Output impedance50 Ω
DisplayLED (5-digit display, full-scale count depends on range)
Measurement timeFast: 13 msec, Normal: 90 msec, Slow: 400 msec. (at 120 Hz)
Fast: 5 msec, Normal: 60 msec, Slow: 300 msec. (at 1 kHz)
DC biasDC voltage/DC current can be superimposed on the measurement signal.
(Requires optional unit and external constant voltage source/constant current source.)
FunctionsPanel save and load function, External input/Output (EXT. I/O), GP-IB (option) or RS-232C interface
Power supplySelectable 100, 120, 220 or 240V AC ±10%, 50/60Hz, 20VA max.
Dimensions and mass210 mm (8.27 in) W × 100 mm (3.94 in) H × 168 mm (6.61 in) D, 2.5 kg (88.2 oz)
AccessoriesInstruction manual × 1, Power cord × 1, Spare fuse × 1

CATALOGS

CATALOG: LCR METER SERIES 

DOWNLOAD

LCR HITESTER 3511-50 

DOWNLOAD

SMD TEST FIXTURE IM9110 

DOWNLOAD

IMPEDANCE ANALYZER IM7580 SERIES 

DOWNLOAD

USER GUIDES

LCR APPLICATION GUIDE 

DOWNLOAD

DECLARATION OF CONFORMITY

LCR HITESTER 3511-50 [100KB] 

DOWNLOAD

OPTIONS

Connection Options

* L9217: for motor analysis input

CONNECTION CABLE 9444

9 pin – 9 pin straight, 1.5 m (4.92 ft) length

Other options for Input

CONNECTION CORD 9165

Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length

PC communication

*The 9151-02 is only for the RM3545-01

GP-IB INTERFACE 9518-01

Built into rear panel

GP-IB CONNECTOR CABLE 9151-02

2 m (6.56 ft) length

Printer options

*PRINTER UNIT is a built-in option that must be specified upon order.

AC ADAPTER 9443-02

For the Printer 9442, EU type

PRINTER 9442

For printing numerical values 112 mm (4.41 in) paper width, not CE marked

RECORDING PAPER 1196

For the Printer 9442, 112 mm (4.41 in) × 25 m (82.03 ft), 10 rolls/set

Probe and Test fixtures

SMD TEST FIXTURE IM9110

• Direct connection two-terminal measurement type • DC to 1 MHz • Measurable sample sizes: 008004 (EIA)

DC BIAS CURRENT UNIT 9269

42 Hz to 100 kHz, Max. allowable current: ±2A DC

DC BIAS VOLTAGE UNIT 9268

42 Hz to 5 MHz, Max. allowable voltage: ± 40 V DC

CONNECTION CORD 9166

Metal BNC to clip, 1.5 m (4.92 ft) length

TEST FIXTURE 9261

DC to 8 MHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω

4-TERMINAL PROBE 9140

DC to 100 kHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω

PINCHER PROBE L2001

Cable length 73 cm (2.40 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, tip electrode spacing: 0.3 (0.01 in) to 6 mm (0.24 in)

CONTACT TIPS IM9902

To replace the tip on the L2001, small size

CONTACT TIPS IM9901

To replace the tip on the L2001, regular size, bundled with the L2001

SMD TEST FIXTURE 9699

Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high

SMD TEST FIXTURE 9677

Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)

SMD TEST FIXTURE 9263

Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)

TEST FIXTURE 9262

Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)

SMD TEST FIXTURE IM9100

• Direct connection type • SMDs with electrodes on the bottom • DC to 8MHz • Measurable sample sizes: 01005 to 0402 (EIA)

Categories

Social Links