Integrate real-time meteorological data into their SCADA systems via Modbus TCP or LTE-TDD cellular network.
DETAILS
iPackACCESS is a communications and power module for the SymphoniePRO® data loggers that enables wind farm operators to integrate real-time meteorological data into their SCADA (Supervisory Control and Data Acquisition) systems via Modbus TCP or LTE-TDD cellular network.
iPackACCESS serves up real-time 1 Hz sample as well as statistical data at user-selected intervals. Data are delivered to pre-defined Modbus registers or via email by cellular modem. With no coding required, iPackACCESS offers ease-of-use and data security by limiting access to defined IP addresses.
DATA LOGGER CONNECTION
iPackACCESS attaches to a port located on the back of your Symphonie series data logger. The iPackACCESS and data logger are then mounted in a Symphonie shelter box for security and environmental protection.
MODBUS DEMO CLIENT APPLICATION
This lightweight utility can be run off of a USB drive and used at various points in your network to troubleshoot and establish the proper connectivity of your logger/iPack system. The latest version is compatible with the SymphoniePRO data logger when paired with an iPackACCESS.
BENEFITS
- Deliver real-time, 1 Hz meteorological data into your wind farm’s SCADA system via Modbus TCP or LTE-TDD cellular network.
- Deliver statistical data (average, standard deviation, min, max, and max 3-sec gust*) at user-selected intervals (1, 2, 5, 10, 15, 30, and 60 minutes) so it can be directly forwarded to forecasting providers or other stakeholders*
- Access the data on pre-defined registers using industry-standard Modbus TCP protocol or through LTE-G cellular network.*
- Ensure the security of your data by limiting access via user-defined IP addresses
- Quickly install the unit in the field, no coding required*
* Feature enhanced by and/or exclusively available when iPackACCESS is paired with SymphoniePRO.
IN THE BOX
- One (1) Symphonie iPackACCESS
- One (1) GPS antenna
Note: The iPack voltmeter SCM is now included in SymphoniePLUS3 data logger kits. SymphoniePRO includes built-in monitoring of the 12V power supply and does not require a separate interface module.
SPECIFICATIONS
Please call us at +1 802-482-2255 for specifications.