SYMPHONIE® IPACKGPS | LTE-G – SOLAR

SYMPHONIE® IPACKGPS | LTE-G – SOLAR

SYMPHONIE® IPACKGPS | LTE-G – SOLAR

Automate the transfer of measurement data from the field to your desktop via 2G GPRS, 3G or 4G LTE network.

DETAILS

The Symphonie iPackGPS | LTE-G is an internet-enabled communications and autonomous power module for SymphoniePRO data loggers. Utilizing a specialized global frequency modem that connects your data logger to the internet through a 2G GSM, 3G WCDMA, or 4G LTE cellular network, iPackGPS delivers measurement data to your desktop anywhere in the world.

SYMPHONIEPRO

When used with the SymphoniePRO Data Logger, iPackGPS enables remote bi-directional communication with the SymphoniePRO Desktop Application using our MetLink protocol in addition to the traditional SMTP email data delivery path. MetLink connections can be initiated either by the logger or the SymphoniePRO Desktop Application, allowing you to connect remotely as needed.

Flexible scheduling options and support for multiple data delivery methods provide redundant paths for the transfer of critical resource data. Once established, remote MetLink connection sessions provide full access to the data logger and iPack, including:

  • Automated or manual download of data files (alternative to SMTP email)
  • Live data viewing for site health checks
  • Configuration settings changes in the data logger or iPack
  • Firmware upgrades to the data logger or iPack

See the SymphoniePRO Data Logger product page and user manual for more details. Note: iPackGPS units require a firmware upgrade for compatibility with the SymphoniePRO Data Logger.

DATA LOGGER CONNECTION

iPackGPS attaches to a port located on the back of your Symphonie series data logger. The iPackGPS and the data logger are then secured to a Symphonie shelter box using four screws.

POWER SUPPLY

The iPackGPS | LTE-G contains one rechargeable 12 V sealed lead-acid battery and a recharging circuit. The battery recharging circuit is designed for use with an external 15W PV panel that connects to terminals on the side of the iPackGPS. Terminals for an external power system are also available. This configuration keeps the internal batteries continuously charged—ensuring reliable data logging and transfer operations.

CELLULAR ANTENNA

Each iPackGPS | LTE-G ships with an omnidirectional antenna appropriate for sites where a cellular tower is nearby. If a different antenna solution is required, please contact us.

ACCOUNTS AND PROGRAMMING

The iPackGPS | LTE-G requires either 2G GSM, 3G WCDMA, or 4G LTE data service and an Internet Service Provider (ISP) account to function properly. GSM and ISP accounts need to be obtained from the provider of your choice, and the required settings for the accounts should be programmed into the Symphonie iPackGPS prior to use.

BENEFITS

  • Automatic transfer of logged data via email, or additionally via direct MetLink connection when used with SymphoniePRO
  • Worldwide operation from any location with 2G GSM, 3G WCDMA, or 4G LTE service
  • Integrated autonomous power supply saves installation time and powers entire system
  • Customizable data transmission fits your schedule or application with call intervals ranging from 10 minutes to 14 days
  • WindLinx™-ready wireless service and web-based management portal
  • Access to network information including signal strength, network operator, modem band, DNS, and IP address
  • Complete iPackGPS history log to monitor events from communication sessions
  • Automated GPS coordinate reporting
  • Ability to remotely update the iPackGPS firmware and configuration

IN THE BOX

  • One (1) Symphonie iPackGPS | LTE-G
  • One (1) WindLinx SIM card with activation form
  • One (1) cellular antenna
  • One (1) GPS antenna

Notes:

  • Symphonie PV Panel | 15W sold separately.
  • The iPack voltmeter SCM is now included in SymphoniePLUS3 data logger kits. SymphoniePRO includes built-in monitoring of the 12V power supply and does not require a separate interface module.

SPECIFICATIONS PRINT SPECS

 LTE-G, ATT- Solar (#16803)LTE-G, Windlinx- Solar (#16805)
DESCRIPTION 
Instrument typeInternet-enabled remote communication and autonomous power module for SymphoniePRO data loggersInternet-enabled remote communication and autonomous power module for SymphoniePRO data loggers
ApplicationsWind and solar resource assessment and forecastingEnables internet features for SymphoniePRO where cellular data services are available:LTE FDD-4G: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28LTE TDD-4G: B38/B39/B40/B41WCDNA-3G:B1/B2/B4/B5/B6/B8/B19GSM-2G: B2/B3/B5/B8WorldwideWind and solar resource assessment and forecastingEnables internet features for SymphoniePRO where cellular data services are available:LTE FDD-4G: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28LTE TDD-4G: B38/B39/B40/B41WCDNA-3G:B1/B2/B4/B5/B6/B8/B19GSM-2G: B2/B3/B5/B8Worldwide
Instrument compatibilitySymphoniePRO data loggersSymphoniePRO data loggers
FunctionsEnables remote MetLink connections for real-time two-way communication, including automated data delivery, firmware updates, and/or configuration updates to data logger and iPackGPSGPS time synchronizationAutomatic transfer of logged data via emailAutomatically updates latitude, longitude, and altitude settings in the data loggerGPS position vieweriPackGPS status and event reportingGSM/3G/4G (cellular) signal confirmation indicatorAccepts remote firmware updatesAutomatic real-time clock setting from internet time serverRemote parameter updates of SymphoniePRO data loggers and iPackGPSAbility to disconnect a call in progressEvent log viewerIncludes rechargeable battery and PV charge controller for the data loggerEnables remote MetLink connections for real-time two-way communication, including automated data delivery, firmware updates, and/or configuration updates to data logger and iPackGPSGPS time synchronizationAutomatic transfer of logged data via emailAutomatically updates latitude, longitude, and altitude settings in the data loggerGPS position vieweriPackGPS status and event reportingGSM/3G/4G (cellular) signal confirmation indicatorAccepts remote firmware updatesAutomatic real-time clock setting from internet time serverRemote parameter updates of SymphoniePRO data loggers and iPackGPSAbility to disconnect a call in progressEvent log viewerIncludes rechargeable battery and PV charge controller for the data logger
DATA COLLECTION 
SoftwareConfiguration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))Configuration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
Data deliveryData delivery via SMTP email and/or MetLink connectionsConfiguration changes and firmware updates administered via MetLink connections remotely or locally via logger USB connection.Data delivery via SMTP email and/or MetLink connectionsConfiguration changes and firmware updates administered via MetLink connections remotely or locally via logger USB connection.
CONFIGURATION 
User interfaceStatus reporting via data logger user interfaceConfiguration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))Status reporting via data logger user interfaceConfiguration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
Configurable parametersAT&T LTE-G readyCall interval range: 10 minutes – 14 daysInternet Service Provider settingsOptional ‘No Partial Files’ settingUp to three (3) email addressesWindLinx readyCall interval range: 10 minutes – 14 daysInternet Service Provider settingsOptional ‘No Partial Files’ settingUp to three (3) email addresses
CONNECTIONS 
Communication portsQMA (f) connector for GPS antennaSMA (f) connector for cellular antennaQMA (f) connector for GPS antennaSMA (f) connector for cellular antenna
POWER REQUIREMENTS 
BatteriesOne (1) built-in 12V Sealed Lead-Acid (SLA) battery with 2200 mA-hr ratingOne (1) built-in 12V Sealed Lead-Acid (SLA) battery with 2200 mA-hr rating
External power inputExternal battery input (12 to 14 V, 500 mA max.)External battery input (12 to 14 V, 500 mA max.)
External solar input12 V (nominal) solar PV panel or external power supply (15 to 28 V), 1 A max.12 V (nominal) solar PV panel or external power supply (15 to 28 V), 1 A max.
INSTALLATION 
MountingiPackGPS attaches to back of SymphoniePRO data logger with (4) long logger mounting screwsStandard multi-band cellular antenna is magnetically mounted to top of shelter boxGPS antenna is magnetically mounted to top of shelter boxSymphonie Solar PV panel 15W (optional) available with lattice or tubular mount for NRG towers.iPackGPS attaches to back of SymphoniePRO data logger with (4) long logger mounting screwsStandard multi-band cellular antenna is magnetically mounted to top of shelter boxGPS antenna is magnetically mounted to top of shelter boxSymphonie Solar PV panel 15W (optional) available with lattice or tubular mount for NRG towers.
AccessoriesGPS antenna and cellular antenna (both included)GPS antenna and cellular antenna (both included)
PHYSICAL 
Dimensions165 x 222 x 51 mm (6.5 x 8.75 x 2.0 inches)165 x 222 x 51 mm (6.5 x 8.75 x 2.0 inches)
MATERIALS 
EnclosureWeather-proof polycarbonate plasticIP65 RatedWeather-proof polycarbonate plasticIP65 Rated

Categories

Social Links