Pair with Memory Recorders to Achieve a Single-device Solution for Waveform Recording and Generation
DESCRIPTION
MODEL NO. (ORDER CODE)
| U8793 | For the MR8847A or other |
|---|
Note: Use with Hioki Memory Hicorders. *Output cords are not included. Please purchase them seperately.
The Arbitrary Waveform Generator Unit U8793 is a plug-and-play module for the Hioki Memory HiCorder to create a function generator, arbitrary waveform generator, and waveform measurement in a single device. Easily observe waveforms while varying test conditions, such as changing the signal’s amplitude and frequency as well as programming various waveforms to output in order.
KEY FEATURES
• Output arbitrary waveform signals up to 2 channels
• Output problematic waveforms recorded with the Memory Hicorder up to 15 V
• Output customized arbitrary waveforms signals up to 15 V
• For use with Hioki Memory Hicorder series (cannot use with 8847 or MR8847)
• Built-in function generator and sweep function
• Isolated between unit and output, and between all channels
BASIC SPECIFICATIONS (ACCURACY GUARANTEED FOR 1 YEAR, POST-ADJUSTMENT ACCURACY GUARANTEED FOR 1 YEAR)
| Output terminal | Number of channels: 2, SMB terminal (Output impedance: 1 Ω or less) Max. rated voltage to ground: 33 V rms AC or 70 V DC |
|---|---|
| Output voltage range | -10 V to 15 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV) |
| Max. output current | 10 mA (Allowable load resistance: 1.5 kΩ or more) |
| Function generator | DC, Sine wave, Square wave, Pulse wave, Triangular wave, Ramp wave, Output frequency: 0 Hz to 100 kHz |
| Arbitrary waveform generator mode | Waveforms measured by MR8847A, etc., generated by Hioki Model 7075, PW3198, or SF8000, CSV waveforms D/A refresh rate: 2 MHz (using 16-bit D/A) |
| Sweep function | Frequency, Amplitude, Offset, Duty (Pulse only) |
| Program function | Max. 128 steps (Number of loops for each step, Number of total loops) |
| Other | Self-test function (Voltage), External input/output control |
| Dimensions and mass | 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz) |
| Accessories | None |
CATALOGS
WAVEFORM GENERATOR SYSTEM U8793,MR8847A 
TECHNICAL NOTES
ARBITRARY WAVEFORM GENERATOR UNIT U8793, WAVEFORM GENERATOR UNIT MR8790, AND PULSE GENERATOR UNIT MR8791
OPTIONS
Output cables
* Please contact your local HIOKI distributor for connectors that support Model MR8791.
CONNECTION CABLE L9795-01
SMB to alligator clip, 1.5 m (4.92 ft) length
CONNECTION CABLE L9795-02
SMB to BNC terminal, 1.5 m (4.92 ft) length
Use with these Products
*Cannot use with 8847 or MR8847
MEMORY HiCORDER MR8847A
• Max. 16ch Analog + 16ch Logic • Max. 10ch Analog + 64ch Logic • 20M-Sampling/s • 32M to 256M-Word Memory (2ch) • Waveform judgment function • 12-bit/16-bit A/D resolution • USB, HD, CF-card
MEMORY HiCORDER MR8827
• Max. 32ch Analog + 32ch Logic • Max. 28ch Analog + 64ch Logic • 20M-Sampling/s • 16M to 128M-Word Memory (4ch) • 12-bit/16-bit/24-bit A/D resolution • USB, SSD, CF-card
MEMORY HiCORDER MR8740, MR8741
• Max. 54ch/16ch Analog + 16ch Logic • 20M-Sampling/s • 12-bit/16-bit A/D resolution